Purpose:
CMS1-4500/55 coal mine deep hole driller is a new generation of tracked drilling equipment with the function of water exploration, gas detection, fault detection, roof caving, water injection, etc., which is mainly used to carry out dense-shaped drilling in soft rock or coal seam required by outburst prevention measures in the heading face. It also applies to other occasions. The equipment has the characteristics of compact structure, flexible operation, good maneuverability, full-section operation, good safety, multiple use of one machine and so on. In addition to the completion of water exploration and gas detection, it can also drill into complex strata. Other drilling tools, such as common reamer bits, can be used for rotary drilling. In the whole coal roadway operation, the twist drill rods and reamer bits are used to drill the hole.
Advantages:
1.Work safety, can significantly reduce the physical labor intensity of workers. Suitable for the construction of flat and oblique roadway with various sections, the propeller can operate at 90 °
2.Compact structure, full hydraulic control, convenient and flexible operation, crawler walking, convenient displacement, good mobility, time-saving, labor-saving.
3.The drilling machine has large torque, long stroke and high drilling efficiency. It can greatly improve the working efficiency, and it is equipped with the parts which can load and unload drill pipes to reduce the labor intensity of the operator.
Main technical parameters:
Projects | Units | Parameters |
Machine performance | Number of drill arms |
| 1 |
Adaptive roadway section(wide*high) | mm | 1700×1940 |
Operating state dimensions (length * width * height) | mm | 4380×1100×1800（±20） |
Minimum turning radius of running state | mm | 2600 |
Working condition steady vehicle working width | mm | 1100 |
Machine weight | kg | 7000 |
Drilling diameter | mm | Φ75-Φ131 |
Drilling depth | m | 200 |
Rinse water pressure | MPa | 0.6-1.2 |
Operating point sound pressure level | dB（A） | 95 |
Sound power level | dB（A） | 125 |
Starting current | A | 275 |
Drilling machine | Type characteristics |
| Hydraulic rotary |
Rotary mechanism | Rated torque | N·m | 3200 |
Rated speed | r/min | 75 |
Rated working pressure | MPa | 20 |
Rated working flow | L/min | 120 |
Maximum working pressure | MPa | 25 |
Torque under Maximum working pressure | N·m | 4500 |
Thrusters | Type characteristics |
| Guideway hydraulic cylinder propulsion |
Ways of advancement |
| Guideway hydraulic cylinder propulsion |
Total length | mm | 1700 |
Advance travel | mm | 600±5 |
Propulsion force | kN | 85 |
Lifting force | kN | 120 |
No-load propulsion speed | m/min | 10 |
No-load return speed | m/min | 10 |
Working pressure | MPa | 10 |
Workflow | L/min | 38 |
Arm body horizontal lift height | mm | 1000 |
Walking mechanism | Walking style |
| Track type |
Type of driving mechanism |
| Hydraulic motor drive |
Walking speed | m/min | 15 |
Climbing capacity | （°） | ±16 |
Trackboard width | mm | 260 |
Working pressure | MPa | 16 |
Workflow | L/min | 70 |
Pumping Station | Motor | Rated power | kW | 55 |
Rated voltage | V | 660/1140 |
Rated current | A | 59.31/34.24 |
Rated speed | r/min | 1480 |
Oil pump | Type |
| Variable plunger pump |
Rated pressure | MPa | 25 |
Displacement | L/min | 130/45 |
